Tap Hole Drill Rod Factory Factory – Bench and long-hole drilling T51 (2″) – LYNE
Tap Hole Drill Rod Factory Factory – Bench and long-hole drilling T51 (2″) – LYNE Detail:
MF rod/Speed rod/Male-Female drill rods
Threaded Connection: R22, R25, R32, R38, T38, T45, T51, T60 and so on.
Diameter: OD32, OD38, Hex32, Hex35, And so on.
Length: 800-6000mm.
Package: Ply-wooden cases or wrapped with plastic knitting and then packed into bundles or as per your requests.
Male / Male rod, Male/Female (M/F) Rod -Speed rod
M/F drill steel is an alternative to couplings sleeves to include the female part of the threaded connection as an integral part of the drill steel. M/F drill steel provides more rigid connections and is easier to uncouple and handle. The service life also tends to be better than with separate couplings.
For Extension Rod and M/F steel process, the below two different types of heat treatment are used to strengthen high speed and powerful percussive drill string components to maximize their performance and reliability.
Bench and long-hole drilling T51 (2″)
Bits |
Diameter |
Buttons,mm |
Angle |
Flushing hole |
Weight approx kg |
Part No. |
||||||
mm |
in |
Front No Size |
Gauge No Size |
Type |
Front |
Gauge |
||||||
Button bit | ||||||||||||
89 |
3 1/2” |
5×13 |
8×13 |
35º |
4 |
- |
3.5 |
1432-89T51-513/813-45-41 |
||||
89 |
3 1/2” |
5×13 |
8×13 |
40º |
4 |
- |
3.5 |
1432-89T51-513/813-45-41 |
||||
89 |
3 1/2” |
5×12 |
8×12 |
35º |
4 |
- |
3.5 |
1432-89T51-512/812-45-41 |
||||
102 |
4” |
6×12 |
8×13 |
35º |
4 |
- |
4.4 |
1432-102T51-612/813-45-4 |
||||
102 |
4” |
6×12 |
8×13 |
40º |
4 |
- |
4.4 |
1432-102T51-612/813-45-51 |
||||
115 |
4 1/2” |
6×13 |
8×13 |
35º |
4 |
- |
6.0 |
1432-115T51-613/813-45-41 |
||||
115 |
4 1/2” |
6×13 |
8×14 |
35º |
4 |
- |
6.0 |
1432-115T51-613/814-45-41 |
Button bit, Flat face | ||||||||||
89 |
3 1/2” |
4×13 |
8×13 |
40º |
2 |
- |
3.6 |
1431-89T51-413/813-45-41 |
||
89 |
3 1/2” |
4×12 |
8×12 |
40º |
2 |
- |
3.6 |
1431-89T51-413/812-45-41 |
||
102 |
4” |
4×14 |
8×14 |
40º |
2 |
- |
5.0 |
1431-102T51-414/814-45-4 |
||
89 |
3 1/2” |
6×11 |
8×12 |
35º |
2 |
- |
3.6 |
1431-89T51-611/812-45-41 |
||
89 |
3 1/2” |
6×11 |
8×12 |
40º |
2 |
- |
3.6 |
1431-89T51-611/812-45-41 |
||
102 |
4” |
6×12 |
8×13 |
35º |
2 |
- |
5.0 |
1431-102T51-612/813-45-4 |
||
102 |
4” |
6×12 |
8×13 |
40º |
2 |
- |
5.0 |
1431-102T51-612/813-45-51 |
||
115 |
4 1/2” |
6×13 |
8×13 |
35º |
2 |
- |
6.0 |
1431-115T51-613/813-45-41 |
||
115 |
4 1/2” |
6×13 |
8×14 |
35º |
2 |
- |
6.0 |
1431-115T51-613/814-45-41 |
||
89 |
3 1/2” |
7×11 |
9×11 |
35º |
3 |
- |
3.6 |
1431-89T51-711/911-45-41 |
||
89 |
3 1/2” |
7×11 |
9×12 |
35º |
3 |
- |
3.6 |
1431-89T51-711/912-45-41 |
||
102 |
4” |
7×12 |
9×12 |
35º |
3 |
- |
5.0 |
1431-102T51-712/912-45-41 |
||
102 |
4” |
7×12 |
9×13 |
35º |
3 |
- |
5.0 |
1431-102T51-712/913-45-41 |
||
115 |
4 1/2” |
7×13 |
9×13 |
35º |
3 |
- |
6.0 |
1432-115T51-713/913-45-41 |
||
115 |
4 1/2” |
7×13 |
9×14 |
35º |
3 |
- |
6.0 |
1432-115T51-713/914-45-41 |
Button bit, Drop center | ||||||||||
89 |
3 1/2” |
5×11 |
6×13 |
35º |
3 |
1 |
3.5 |
1433-89T51-511/613-45-41 |
||
89 |
3 1/2” |
5×11 |
6×13 |
35º |
3 |
1 |
3.5 |
1433-89T51-511/613-45-41 |
||
102 |
4” |
5×13 |
6×14 |
35º |
3 |
1 |
5.0 |
1433-102T51-513/614-45-4 |
||
102 |
4” |
5×13 |
6×14 |
35º |
3 |
1 |
5.0 |
1433-102T51-513/614-45-4 |
||
89 |
3 1/2” |
6×11 |
8×12 |
35º |
4 |
1 |
3.6 |
1433-89T51-611/812-45-41 |
||
89 |
3 1/2” |
6×11 |
8×12 |
40º |
4 |
1 |
3.6 |
1433-89T51-611/812-45-41 |
||
102 |
4” |
6×12 |
8×13 |
35º |
4 |
1 |
5.0 |
1433-102T51-612/813-45-41 |
||
102 |
4” |
6×12 |
8×13 |
40º |
4 |
1 |
5.0 |
1433-102T51-612/813-45-41 |
||
115 |
4 1/2” |
6×13 |
8×13 |
35º |
4 |
1 |
6.0 |
1431-115T51-613/813-45-41 |
||
115 |
4 1/2” |
6×13 |
8×14 |
35º |
4 |
1 |
6.0 |
1431-115T51-613/814-45-41 |
||
115 |
4 1/2” |
6×13 |
8×14 |
40º |
4 |
1 |
6.0 |
1431-115T51-613/814-45-51 |
||
127 |
5” |
7×14 |
8×14 |
35º |
4 |
1 |
6.8 |
1432-127T51-613/814-45-41 |
Button bit, Retrac | ||||||||||
89 |
3 1/2” |
5×13 |
8×13 |
35º |
4 |
- |
4.5 |
1632-89T51-513/813-45-41 |
||
89 |
3 1/2” |
5×13 |
8×13 |
40º |
4 |
- |
4.5 |
1632-89T51-513/813-45-41 |
||
89 |
3 1/2” |
5×12 |
8×12 |
35º |
4 |
- |
4.5 |
1632-89T51-512/812-45-41 |
||
102 |
4” |
6×12 |
8×13 |
35º |
4 |
- |
6.2 |
1632-102T51-612/813-45-41 |
||
102 |
4” |
6×12 |
8×13 |
40º |
4 |
- |
6.2 |
1632-102T51-612/813-45-41 |
||
115 |
4 1/2” |
6×13 |
8×13 |
35º |
4 |
- |
8.4 |
1632-115T51-613/813-45-41 |
||
115 |
4 1/2” |
6×13 |
8×14 |
35º |
4 |
- |
8.4 |
1632-115T51-613/814-45-41 |
Button bit, Retrac, Flat face | ||||||||||
89 |
3 1/2” |
4×13 |
8×13 |
40º |
2 |
- |
5.0 |
1531-89T51-413/813-45-41 |
||
89 |
3 1/2” |
4×13 |
8×13 |
40º |
2 |
- |
5.0 |
1531-89T51-413/813-45-41 |
||
102 |
4” |
4×14 |
8×14 |
40º |
2 |
- |
7.0 |
1431-102T51-414/814-45-4 |
||
89 |
3 1/2” |
6×11 |
8×12 |
35º |
2 |
- |
5.0 |
1531-89T51-611/812-45-41 |
||
89 |
3 1/2” |
6×11 |
8×12 |
40º |
2 |
- |
5.0 |
1531-89T51-611/812-45-41 |
||
102 |
4” |
6×12 |
8×13 |
35º |
2 |
- |
7.0 |
1531-102T51-612/813-45-51 |
||
102 |
4” |
6×12 |
8×13 |
40º |
2 |
- |
7.0 |
1531-102T51-612/813-45-51 |
||
115 |
4 1/2” |
6×13 |
8×13 |
35º |
2 |
- |
9.5 |
1531-115T51-613/813-45-41 |
||
115 |
4 1/2” |
6×13 |
8×14 |
35º |
2 |
- |
9.5 |
1531-115T51-613/814-45-41 |
||
89 |
3 1/2” |
7×11 |
9×11 |
35º |
3 |
- |
5.0 |
1531-89T51-711/911-45-41 |
||
89 |
3 1/2” |
7×11 |
9×12 |
35º |
3 |
- |
5.0 |
1531-89T51-711/912-45-41 |
||
102 |
4” |
7×12 |
9×12 |
35º |
3 |
- |
7.0 |
1531-102T51-712/912-45-41 |
||
102 |
4” |
7×12 |
9×13 |
35º |
3 |
- |
7.0 |
1531-102T51-712/913-45-41 |
||
115 |
4 1/2” |
7×13 |
9×13 |
35º |
3 |
- |
9.5 |
1531-115T51-713/913-45-41 |
||
115 |
4 1/2” |
7×13 |
9×14 |
35º |
3 |
- |
9.5 |
1531-115T51-713/914-45-41 |
Button bit, Retrac, Drop center | ||||||||||
89 |
3 1/2” |
5×11 |
6×13 |
35º |
3 |
1 |
5.0 |
1533-89T51-511/613-45-41 |
||
89 |
3 1/2” |
5×11 |
6×13 |
35º |
3 |
1 |
5.0 |
1533-89T51-511/613-45-41 |
||
102 |
4” |
5×13 |
6×14 |
35º |
3 |
1 |
7.0 |
1533-102T51-513/614-45-4 |
||
102 |
4” |
5×13 |
6×14 |
35º |
3 |
1 |
7.0 |
1533-102T51-513/614-45-4 |
||
89 |
3 1/2” |
6×11 |
8×12 |
35º |
4 |
1 |
5.0 |
1533-89T51-611/812-45-41 |
||
89 |
3 1/2” |
6×11 |
8×12 |
40º |
4 |
1 |
5.0 |
1533-89T51-611/812-45-41 |
||
102 |
4” |
6×12 |
8×13 |
35º |
4 |
1 |
7.0 |
1533-102T51-612/813-45-41 |
||
102 |
4” |
6×12 |
8×13 |
40º |
4 |
1 |
7.0 |
1533-102T51-612/813-45-41 |
||
115 |
4 1/2” |
6×13 |
8×13 |
35º |
4 |
1 |
9.5 |
1531-115T51-613/813-45-41 |
||
115 |
4 1/2” |
6×13 |
8×14 |
35º |
4 |
1 |
9.5 |
1531-115T51-613/814-45-41 |
||
115 |
4 1/2” |
6×13 |
8×14 |
40º |
4 |
1 |
9.5 |
1531-115T51-613/814-45-51 |
||
127 |
5” |
7×14 |
8×14 |
35º |
4 |
1 |
11.5 |
1532-127T51-613/814-45-41 |
Reaming bit, T51 | ||||||||||
127 |
5” |
6×14 |
8×14 |
35º |
4 |
- |
8.0 |
1441-127T51-614/814-45-41 |
||
152 |
6” |
6×14 |
8×14 |
35º |
4 |
- |
11.0 |
1441-152T51-614/814-45-41 |
||
Rods |
Length |
Diameter |
Weight approx kg |
Part No. |
||
mm |
ft/in |
mm |
inch |
|||
Extension rod, T51-Round52-T51 | ||||||
3660 |
12' |
51 |
2” |
50.9 |
23R52-T51-3660-23 |
|
4270 |
14' |
51 |
2” |
59.4 |
23R52-T51-4270-23 |
|
6100 |
20' |
51 |
2” |
84.8 |
23R52-T51-6100-23 |
MF-rod, T51-Round52-T51 | ||||||
1525 |
5' |
51 |
2” |
23.8 |
24R52-T51/72-1525-23 |
|
1830 |
6' |
51 |
2” |
28.1 |
24R52-T45/72-1830-23 |
|
3050 |
10' |
51 |
2” |
45.0 |
24R52-T45/72-3050-23 |
|
3660 |
12' |
51 |
2” |
53.5 |
24R52-T45/72-3660-23 |
|
4270 |
14' |
51 |
2” |
62.0 |
24R52-T45/72-4270-23 |
|
6100 |
20' |
51 |
2” |
87.4 |
24R52-T45/72-6100-23 |
Guide tube | ||||||
1830 |
6' |
76 |
3” |
40.0 |
24G76-T51/76-1830-23 |
|
3660 |
12' |
76 |
3” |
79.1 |
24G76-T51/76-3660-23 |
|
3660 |
12' |
87 |
3 1/2” |
90.9 |
24G87-T51/87-3660-23 |
Coupling sleeve | |||||||
T51 |
235 |
8 7/8” |
72 |
2 7/8” |
4.0 |
31-T51-72-235-23 |
|
T51 |
235 |
8 7/8” |
77 |
3 1/32” |
4.6 |
31-T51-77-235-23 |
|
Product detail pictures:
Related Product Guide:
We usually believe that one's character decides products' high quality, the details decides products' excellent ,with the REALISTIC,EFFICIENT AND INNOVATIVE staff spirit for Tap Hole Drill Rod Factory Factory – Bench and long-hole drilling T51 (2″) – LYNE , The product will supply to all over the world, such as: Montpellier, Riyadh, Provence, With the technology as the core, develop and produce high-quality products according to the diverse needs of the market. With this concept,the company will continue to develop products with high added values and continuously improve products,and will provide many customers with the best products and services!
By Belle from Portugal - 2018.05.15 10:52
We feel easy to cooperate with this company, the supplier is very responsible, thanks.There will be more in-depth cooperation.
By Janice from Jordan - 2017.09.29 11:19