English

Products

Hello, come to consult our products !
Rock Drill Shank Supplier – Bench and long-hole drilling T38 (1 1/2 “) – LYNE Featured Image
  • Rock Drill Shank Supplier – Bench and long-hole drilling T38 (1 1/2 “) – LYNE

Rock Drill Shank Supplier – Bench and long-hole drilling T38 (1 1/2 “) – LYNE


Product Detail

Product Tags

Related Video

Feedback (2)

We constantly think and practice corresponding to the change of circumstance, and grow up. We aim at the achievement of a richer mind and body along with the living for Blast Furance Drill Bit Factory, Retrac Rock Drill Bits, Drilling Into Sandstone, Our experienced specialized group will be wholeheartedly at your support. We sincerely welcome you to check out our site and enterprise and send out us your inquiry.
Rock Drill Shank Supplier – Bench and long-hole drilling T38 (1 1/2 “) – LYNE Detail:

Bench and long-hole drilling T38 (1 1/2 ”)

Bits

Diameter

Buttons,mm

Angle

Flushing hole

Weight approx kg

Part No.

mm

in

Front

No Size

Gauge

No Size

Type

Front

Gauge
Button bit
 Bench and long-hole drilling T38 (1 1/2 ")

64

2 1/2”

3×11

6×12

 Button bit

30º

3

-

1.6

1432-64T38-311/612-45-41

64

2 1/2”

3×11

6×12

 Button bit

35º

3

-

1.6

1432-64T38-311/612-45-51
 Bench and long-hole drilling T38 (1 1/2 ")

64

2 1/2”

5×9

8×10

 Button bit

35º

4

-

1.7

1432-64T38-59/810-45-51

70

2 3/4”

5×10

8×11

 Button bit

30º

4

-

1.9

1432-70T38-510/811-45-41

76

3”

5×11

8×12

 Button bit

35º

4

-

2.3

1432-76T38-511/812-45-41

76

3”

5×11

8×11

 Button bit

40º

4

-

2.3

1432-76T38-511/811-45-51

89

3 1/2”

5×12

8×12

 Button bit

35º

4

-

3.2

1432-89T38-512/812-45-41
Button bit, Flat face
 Bench and long-hole drilling T38 (1 1/2 ")

64

2 1/2”

4×10

8×10

 Button bit

35º

2

-

1.6

1432-64T38-410/810-45-41

70

2 3/4”

4×11

8×11

 Button bit

40º

2

-

1.9

1432-70T38-411/811-45-41

76

3”

4×11

8×11

 Button bit

40º

2

-

2.3

1432-76T38-411/811-45-41

89

3 1/2”

4×12

8×12

 Button bit

40º

2

-

2.3

1432-89T38-412/812-45-41
 Bench and long-hole drilling T38 (1 1/2 ")

76

3”

6×10

8×11

 Button bit

35º

2

-

2.3

1432-76T38-610/811-45-41

76

3”

6×10

8×11

 Button bit

40º

2

-

2.3

1432-76T38-610/811-45-51

89

3 1/2”

6×11

8×12

 Button bit

35º

2

-

3.2

1432-89T38-611/812-45-41
Button bit, Drop center
 Bench and long-hole drilling T38 (1 1/2 ")

64

2 1/2”

4×10

6×11

 Button bit

35º

3

-

1.6

1433-64T38-410/611-45-41

64

2 1/2”

4×10

6×11

 Button bit

35º

3

-

1.6

1433-64T38-410/611-45-51

70

2 3/4”

4×10

6×11

 Button bit

40º

3

-

1.9

1433-70T38-410/611-45-41

76

3”

4×11

6×13

 Button bit

35º

3

-

2.3

1433-76T38-411/613-45-41

76

3”

4×11

6×13

 Button bit

35º

3

-

2.3

1433-76T38-411/613-45-51

89

3 1/2”

5×11

6×13

 Button bit

35º

3

-

3.2

1433-89T38-511/613-45-41
 Bench and long-hole drilling T38 (1 1/2 ")

76

3”

6×10

8×11

 Button bit

35º

4

-

2.3

1433-76T38-610/811-45-41

76

3”

6×10

8×11

 Button bit

35º

4

-

2.3

1433-76T38-610/811-45-51

89

3 1/2”

6×11

8×12

 Button bit

35º

4

-

3.2

1433-89T38-611/812-45-41
Button bit, Retrac
 Bench and long-hole drilling T38 (1 1/2 ")

64

2 1/2”

3×11

6×12

 Button bit

35º

3

-

2.2

1632-64T38-311/612-45-41

64

2 1/2”

3×11

6×12

 Button bit

35º

3

-

2.2

1632-64T38-311/612-45-51
 Bench and long-hole drilling T38 (1 1/2 ")

64

2 1/2”

5×9

8×10

 Button bit

35º

4

-

2.2

1632-64T38-59/810-45-51

70

2 3/4”

5×10

8×11

 Button bit

30º

4

-

2.4

1632-70T38-510/811-45-41

76

3”

5×11

8×12

 Button bit

35º

4

-

2.9

1632-76T38-511/812-45-41

76

3”

5×11

8×11

 Button bit

40º

4

-

2.9

1632-76T38-511/811-45-51

89

3 1/2”

5×12

8×12

 Button bit

35º

4

-

3.2

1632-89T38-512/812-45-41
Button bit, Retrac, Flat face
 Bench and long-hole drilling T38 (1 1/2 ")

64

2 1/2”

4×10

8×10

 Button bit

35º

2

-

2.2

1531-64T38-410/810-45-41

64

2 1/2”

4×10

8×10

 Button bit

35º

2

-

2.2

1531-64T38-410/810-45-51

70

2 3/4”

4×11

8×11

 Button bit

40º

2

-

2.4

1531-70T38-411/811-45-41
 Bench and long-hole drilling T38 (1 1/2 ")

76

3”

6×10

8×11

 Button bit

35º

2

-

3.2

1531-76T38-610/811-45-41

76

3”

6×10

8×11

 Button bit

40º

2

-

3.2

1531-76T38-610/811-45-51

89

3 1/2”

6×11

8×12

 Button bit

35º

2

-

4.7

1531-89T38-611/812-45-41
Button bit, Retrac, Drop center
 Bench and long-hole drilling T38 (1 1/2 ")

64

2 1/2”

4×10

6×11

 Button bit

35º

3

1

2.2

1533-64T38-410/611-45-41

64

2 1/2”

4×10

6×11

 Button bit

35º

3

1

2.2

1533-64T38-410/611-45-51

70

2 3/4”

4×10

6×11

 Button bit

40º

3

1

2.4

1533-70T38-410/611-45-41
 Bench and long-hole drilling T38 (1 1/2 ")

76

3”

4×11

6×13

 Button bit

35º

3

1

3.2

1533-76T38-411/613-45-41

76

3”

4×11

6×13

 Button bit

35º

3

1

3.2

1533-76T38-411/613-45-51
 Bench and long-hole drilling T38 (1 1/2 ")

76

3”

6×10

8×11

 Button bit

35º

4

1

3.2

1533-76T38-610/811-45-41

76

3”

6×10

8×11

 Button bit

35º

4

1

3.2

1533-76T38-610/811-45-51

89

3 1/2”

6×11

8×12

 Button bit

35º

4

1

4.7

1533-89T38-611/812-45-41
X bit
 Bench and long-hole drilling T38 (1 1/2 ")

64

2 1/2”

-

-

-

-

1

2

2.0

1321-64T38-25/13-42-23

76

3”

-

-

-

-

1

2

2.6

1321-64T38-25/13-42-23
Guide bit
 Bench and long-hole drilling T38 (1 1/2 ")

64

2 1/2”

4×9

6×11

 Button bit

35º

3

1

1.9

1632-64T38-49/611-45-51

76

3”

6×10

8×11

 Button bit

35º

4

-

2.4

1632-76T38-610/811-45-51
Reaming bit, T38
 Bench and long-hole drilling T38 (1 1/2 ")

102

4”

9×12

8×12

 Button bit

35º

2

2

3.6

1441-102T38-912/812-45-41

127

5”

9×13

8×13

 Button bit

35º

2

2

6.9

1441-127T38-913/813-45-41
Rods

Length

Diameter

Weight approx kg

Part No.

mm

ft/in

mm

inch
Extension rod, T38－Round39－T38
 Bench and long-hole drilling T38 (1 1/2 ")

1220

4＇

39

1 1/2”

9.9

23R39-T38-1220-23

1525

5＇

39

1 1/2”

12.4

23R39-T38-1525-23

1830

6＇

39

1 1/2”

14.9

23R39-T38-1830-23

3050

10＇

39

1 1/2”

24.7

23R39-T38-3050-23

3660

12＇

39

1 1/2”

29.7

23R39-T38-3660-23
MF－rod, T38－Round39－T38
 Bench and long-hole drilling T38 (1 1/2 ")

1220

4＇

39

1 1/2”

11.5

24R39-T38/57-1220-23

1525

5＇

39

1 1/2”

14.4

24R39-T38/57-1525-23

1830

6＇

39

1 1/2”

16.5

24R39-T38/57-1830-23

3050

10＇

39

1 1/2”

26.4

24R39-T38/57-3050-23

3660

12＇

39

1 1/2”

31.3

24R39-T38/57-3660-23

4270

14＇

39

1 1/2”

36.2

24R39-T38/57-4270-23
Guide tube
 Bench and long-hole drilling T38 (1 1/2 ")

1830

6＇

56

1 13/64”

18.4

24G56-T38/56-1830-23

3660

12＇

56

1 13/64”

33.8

24G56-T38/56-3660-23
Coupling sleeve
 Bench and long-hole drilling T38 (1 1/2 ")

T38

190

6 1/8”

55

1 5/32”

2.0

31-T38-55-190-23

production processcertificate

Description: extension rod, other names are Extension drill steel, Extension drill rod, and Extension steel, M/F rod ( Speedrod ) , Produce Hexagonal and round cross sections, Hexagon rods are more rigid, heavier and transfer energy more efficiently, while  increasing flushing. Round rods are generally lighter thanhexagonal rods and are normally used in extension drilling applications. With the longer steel tending to be larger in diameter, conventional extension steel is characterized by a duplicate thread on each end of the steel.

Main button bits is:
R32-43MM, R32-45MM, R32-51, R32-64, R32-76;
T38-64, T38-76MM, T38-89, T38-102MM;
T45-76MM, T45-89MM, T45-102MM;
T51-89MM, T51-102MM, T51-127MM etc.
all face design, flat face, drop-center face, normal body and retrac body.

Product detail pictures:

Rock Drill Shank Supplier – Bench and long-hole drilling T38 (1 1/2 “) – LYNE detail pictures

Related Product Guide:
Our target should be to consolidate and improve the high-quality and repair of current goods, in the meantime regularly produce new solutions to meet unique customers' needs for Rock Drill Shank Supplier – Bench and long-hole drilling T38 (1 1/2 “) – LYNE , The product will supply to all over the world, such as: Yemen, Uruguay, Czech Republic, Actually need to any of those objects be of interest to you, make sure you allow us to know. We'll be delighted to present you a quotation on receipt of one's comprehensive specs. We've our individual specialist R&D enginners to meet any of the requriements, We look forward to receiving your enquires soon and hope to have the chance to work together with you inside the future. Welcome to take a look at our organization.
    • Reasonable price, good attitude of consultation, finally we achieve a win-win situation,a happy cooperation!
    5 Stars By Doris from Lyon - 2018.12.11 14:13
    With a positive attitude of "regard the market, regard the custom, regard the science", the company works actively to do research and development. Hope we have a future business relationships and achieving mutual success.
    5 Stars By Jack from Argentina - 2017.02.18 15:54
    Write your message here and send it to us
    Hit enter to search or ESC to close