-
China Wholesale Mf Drill Rod Factory Factory – R35 (1 3/8 “) bit thread – LYNE
R35 (1 3/8 ”) bit thread Bits Diameter Buttons,mm Angle Flushing hole Weight approx kg Part No. mm in Front No Size Gauge No Size Type Front Gauge Button bit 48 1 7/8” 2×9 5×11 35º 1 2 0.9 1431-48R32-29/511-45-41 51 2” 2×10 5×12 35º 1 2 1.0 1431-51R32-210/512-45-41 Button bit 48 1 7/8” 3×9 6×10 30º 3 1 0.9 1431-48R35-39/610-45-41 48 1 7/8” 3×9 6×10... -
China Wholesale Road Cutter Teeth Supplier – Foundation Auger Drilling Teeth B47k19h – LYNE
Replaceable Cutter Bit is one kind of Pre-cutting Bit. It can be installed in the Disc Cutter Holder to replace Disc Cutter in smaller-diameter gravel or intensely weathered rocks conditions. Replaceable Cutter Bit and Disc Cutter are spaced or alternated with each other in complex ground, so that Cutter Head can keep best composition during tunneling. Cutter Holder is the connection of cutter and Cutter Head, which facilitates the cutter replacement. Central Cutter Bit is used to cut the cen... -
China Wholesale Cutting Tools Shield Cutting Tools Factory – Coal mining teeth-U76 – LYNE
Protection Cutter Bits are the auxiliary cutters. They are classified into Protective Cutter Bit for Cutter Head, Protection Cutter Bit for Cutter Holder, Protection Cutter Bit for foam filling hole , Protective Cutter Bit for injection hole and Diversion Cutter, which base on their different roles. Copy Cutter Bit is installed on the gauge area of Cutter Head. While Shield Machine tunneling along curve or adjusting the direction, Copy Cutter Bit tries to minimize overbreak to leave the suffi... -
Rock Drill Bits For Hammer Drill Suppliers – Bench and long-hole drilling T45 (1 3/4 “) – LYNE
Drifter rod Drifter rod R32-Hex. 32-R28 10 feet. Drifter rod R38-Hex. 32-R32 12 14 16 feet. Drifter rod T38-Hex. 32-R32 12 14 feet. Drifter rod R38-Hex. 35-R32 10 12 14 16 18 feet. Drifter rod T38-Hex. 35-R32 12 14 16 18 20 feet. M/F rods, T60-Round60-T60, length 3660mm/4265mm/6095mm Bench and long-hole drilling T45 (1 3/4 ”) Bits Diameter Buttons,mm Angle Flushing hole Weight approx kg Part No. mm in Front No Size Gauge No Size Type Front Gauge Button b... -
11 Inch Disc Cutter Supplier – Hard Rock Disc Cutters – LYNE
Disc Cutter is hard rock tool. It is to crush the rocks by the extruding force, shearing force and tensile force formed by cutter rolling. ( The rock strength, rock integrality, tunneling distance, sand content determine the selection, quantity, arrangement of Disc cutters on the Cutter Head). Disc Cutter is generally used in the loose strata which contain much gravels with the diameter bigger than 400mm, and the mixed ground with clay, sandy and up to 30MPa strength rocks. Shield cutters are... -
-
China Wholesale 18 Inch Double Disc Cutter Supplier – Hard Rock Disc Cutters – LYNE
Disc Cutter is hard rock tool. It is to crush the rocks by the extruding force, shearing force and tensile force formed by cutter rolling. ( The rock strength, rock integrality, tunneling distance, sand content determine the selection, quantity, arrangement of Disc cutters on the Cutter Head). Disc Cutter is generally used in the loose strata which contain much gravels with the diameter bigger than 400mm, and the mixed ground with clay, sandy and up to 30MPa strength rocks. Shield cutters are... -
China Wholesale Tungsten Carbide – Shank adapters Sandvik – LYNE
Shank adapters Sandvik Thread Length (mm) Flushing Hole(mm) Weight approx kg Part No. HL 300 R32 400 - 2.8 4HL300-32R32-0400-23 HL 300S R28 245 - 2.8 4HL300-45R28-0245-23 R32 245 - 2.8 4HL300-45R32-0245-23 L400, L410, L500, L510, L550 R32 380 10 2.2 4L400-32R32-0380-23 HLR 438L and HLR 438T R32 380 10 2.7 4HL438-38R32-0380-23 T38 400 12 3.3 4HL438-38T38-0400-23 HLR 438LS, 43... -
Drill Bits For Rock And Concrete Suppliers – Bench and long-hole drilling T60 (2 3/8″) – LYNE
Extension pole, extension rod, extension handle Threaded Connection: R32, R38, T38, T45, T51, and so on. Diameter: OD32, OD38, HEX32, HEX35, And so on. Length: 800-6000MM. Package: Wood case or wrapped with plastic knitting and then packed into bundles or as per your requests. Bench and long-hole drilling T60 (2 3/8″) Bits Diameter Buttons,mm Angle Flushing hole Weight approx kg Part No. mm in Front No Size Gauge No Size Type Front Gauge Button bit 92 3... -
China Wholesale 12degree Rock Drilling Supplier – Shank adapters Sandvik – LYNE
Shank adapters Sandvik Thread Length (mm) Flushing Hole(mm) Weight approx kg Part No. HL 300 R32 400 - 2.8 4HL300-32R32-0400-23 HL 300S R28 245 - 2.8 4HL300-45R28-0245-23 R32 245 - 2.8 4HL300-45R32-0245-23 L400, L410, L500, L510, L550 R32 380 10 2.2 4L400-32R32-0380-23 HLR 438L and HLR 438T R32 380 10 2.7 4HL438-38R32-0380-23 T38 400 12 3.3 4HL438-38T38-0400-23 HLR 438LS, 43... -
Hard Rock Drilling Bits Rock Tools Factory – Bench and long-hole drilling R32 (1 1/4 “) – LYNE
Description: extension rod, other names are Extension drill steel, Extension drill rod, and Extension steel, M/F rod ( Speedrod ) , Produce Hexagonal and round cross sections, Hexagon rods are more rigid, heavier and transfer energy more efficiently, while increasing flushing. Round rods are generally lighter than hexagonal rods and are normally used in extension drilling applications. With the longer steel tending to be larger in diameter, conventional extension steel is characterized by a d... -
Taper Drill Bit Factory – R35 (1 3/8 “) bit thread – LYNE
R35 (1 3/8 ”) bit thread Bits Diameter Buttons,mm Angle Flushing hole Weight approx kg Part No. mm in Front No Size Gauge No Size Type Front Gauge Button bit 48 1 7/8” 2×9 5×11 35º 1 2 0.9 1431-48R32-29/511-45-41 51 2” 2×10 5×12 35º 1 2 1.0 1431-51R32-210/512-45-41 Button bit 48 1 7/8” 3×9 6×10 30º 3 1 0.9 1431-48R35-39/610-45-41 48 1 7/8” 3×9 6×10...
Hello, come to consult our products !
