-
China Wholesale Road Cutter Teeth Supplier – Coal mining teeth – LYNE
Heavy-duty Cutter Bit is mainly used in hard rock stratum or complex strata containing sandy gravel with big diameter, gravel and sandy clay. Its role is to remove the muck to protect Roller Disc Cutter and Pre-cutting Bit body. Scraper Bit is one kind of Cutter Bits which is installed on the extreme edge of Cutter Head. It is used to cut the soft soil around the Cutter Head to keep the same excavation diameter. It is also to remove the stone slag crushed by Disc Cutter and Pre-cutting Bit in... -
China Wholesale Coal Mining Teeth Manufacturers – R35 (1 3/8 “) bit thread – LYNE
R35 (1 3/8 ”) bit thread Bits Diameter Buttons,mm Angle Flushing hole Weight approx kg Part No. mm in Front No Size Gauge No Size Type Front Gauge Button bit 48 1 7/8” 2×9 5×11 35º 1 2 0.9 1431-48R32-29/511-45-41 51 2” 2×10 5×12 35º 1 2 1.0 1431-51R32-210/512-45-41 Button bit 48 1 7/8” 3×9 6×10 30º 3 1 0.9 1431-48R35-39/610-45-41 48 1 7/8” 3×9 6×10... -
China Wholesale Top Hammer Drill Bit Factory – Shank adapters Sandvik – LYNE
Shank adapters Sandvik Thread Length (mm) Flushing Hole(mm) Weight approx kg Part No. HL 300 R32 400 - 2.8 4HL300-32R32-0400-23 HL 300S R28 245 - 2.8 4HL300-45R28-0245-23 R32 245 - 2.8 4HL300-45R32-0245-23 L400, L410, L500, L510, L550 R32 380 10 2.2 4L400-32R32-0380-23 HLR 438L and HLR 438T R32 380 10 2.7 4HL438-38R32-0380-23 T38 400 12 3.3 4HL438-38T38-0400-23 HLR 438LS, 43... -
China Wholesale Trencher Teeth Suppliers – Bench and long-hole drilling T38 (1 1/2 “) – LYNE
Bench and long-hole drilling T38 (1 1/2 ”) Bits Diameter Buttons,mm Angle Flushing hole Weight approx kg Part No. mm in Front No Size Gauge No Size Type Front Gauge Button bit 64 2 1/2” 3×11 6×12 30º 3 - 1.6 1432-64T38-311/612-45-41 64 2 1/2” 3×11 6×12 35º 3 - 1.6 1432-64T38-311/612-45-51 64 2 1/2” 5×9 8×10 35º 4 - 1.7 1432-64T38-59/810-45-51 70 2 3/4” 5×... -
Blast Furance Drill Bit Factory Factory – Blast furnace drill rod – LYNE
Single-Lug (Double-Lug) Threaded Drill Rod Description Length Diameter Part No. mm in mm in 1830 6′ 32 1 1/4” MT32-18 H25L 2435 8′ 32 1 1/4” MT32-24 H25L 3050 10′ 32 1 1/4” MT32-30 H25L 3660 12′ 32 1 1/4” MT32-36 H25L 3830 12’6” 32 1 1/4” MT32-38 H25L 4300 14’1” 32 1 1/4” MT32-43 H25L 1830 6′ 38 1 1/2” MT38-18 D30L 2435 8′ 38 1 1/2” MT38-24 D30L ... -
Mine Rock Drilling Rod Manufacturers – Bench and long-hole drilling ST68 (2 3/4″) – LYNE
Bench and long-hole drilling ST68 (2 3/4″) R25 (1”) R28 (1 1/8”) R32 (1 1/4”) R/T38 (1 1/2”) T45 (1 3/4”) T51 (2”) T60 (2 3/8”) Drill bit R/T38 Extension rod T38 – Hex. 32 mm – T38 Extension rod T38 – Round 38 mm – T38 (Speedrod) Extension rod R38 – Round 38 mm – R38 Extension rod T38 – Round 38 mm – T38 Extenstion rod T38 – Round 38 mm – T38 (with double thread) Guide rod T38 – Round 4... -
Double Disc Cutter Factory – Foundation Auger Drilling Teeth B47k19h – LYNE
Replaceable Cutter Bit is one kind of Pre-cutting Bit. It can be installed in the Disc Cutter Holder to replace Disc Cutter in smaller-diameter gravel or intensely weathered rocks conditions. Replaceable Cutter Bit and Disc Cutter are spaced or alternated with each other in complex ground, so that Cutter Head can keep best composition during tunneling. Cutter Holder is the connection of cutter and Cutter Head, which facilitates the cutter replacement. Central Cutter Bit is used to cut the cen... -
China Wholesale Drill Through Rock – Bench and long-hole drilling T51 (2″) – LYNE
MF rod/Speed rod/Male-Female drill rods Threaded Connection: R22, R25, R32, R38, T38, T45, T51, T60 and so on. Diameter: OD32, OD38, Hex32, Hex35, And so on. Length: 800-6000mm. Package: Ply-wooden cases or wrapped with plastic knitting and then packed into bundles or as per your requests. Male / Male rod, Male/Female (M/F) Rod -Speed rod M/F drill steel is an alternative to couplings sleeves to include the female part of the threaded connection as an integral part of the drill steel. M/F dri... -
China Wholesale Tapered Drill Pipe Supplier – Bench and long-hole drilling ST58 (2 1/4″) – LYNE
Carburization is a process used to harden the entire rod surface both internally and externally to strengthen and extend the life of the rod. High Frequency Induction is a process where only the thread ends of the rod are hardened to lengthen thread life. Our comprehensive range of bench and production rock drilling tools includes everything from 1” rope thread equipment all the way up to T60 thread equipment, Many customers say that our rods, tubes and button bits are the best on the m... -
Button Bits Rock Drilling Manufacturers – Bench and long-hole drilling T60 (2 3/8″) – LYNE
Extension pole, extension rod, extension handle Threaded Connection: R32, R38, T38, T45, T51, and so on. Diameter: OD32, OD38, HEX32, HEX35, And so on. Length: 800-6000MM. Package: Wood case or wrapped with plastic knitting and then packed into bundles or as per your requests. Bench and long-hole drilling T60 (2 3/8″) Bits Diameter Buttons,mm Angle Flushing hole Weight approx kg Part No. mm in Front No Size Gauge No Size Type Front Gauge Button bit 92 3... -
Rock Drill Supplier – Bench and long-hole drilling R32 (1 1/4 “) – LYNE
Description: extension rod, other names are Extension drill steel, Extension drill rod, and Extension steel, M/F rod ( Speedrod ) , Produce Hexagonal and round cross sections, Hexagon rods are more rigid, heavier and transfer energy more efficiently, while increasing flushing. Round rods are generally lighter than hexagonal rods and are normally used in extension drilling applications. With the longer steel tending to be larger in diameter, conventional extension steel is characterized by a d... -
Rock Drill Breaker Factory – Bench and long-hole drilling T45 (1 3/4 “) – LYNE
Drifter rod Drifter rod R32-Hex. 32-R28 10 feet. Drifter rod R38-Hex. 32-R32 12 14 16 feet. Drifter rod T38-Hex. 32-R32 12 14 feet. Drifter rod R38-Hex. 35-R32 10 12 14 16 18 feet. Drifter rod T38-Hex. 35-R32 12 14 16 18 20 feet. M/F rods, T60-Round60-T60, length 3660mm/4265mm/6095mm Bench and long-hole drilling T45 (1 3/4 ”) Bits Diameter Buttons,mm Angle Flushing hole Weight approx kg Part No. mm in Front No Size Gauge No Size Type Front Gauge Button b...
Hello, come to consult our products !
