-
Drill Bit For Rock Jewelry Factory – R25 (1 “) bit thread Bits Diameter – LYNE
Bits Diameter Buttons,mm Angle Flushing hole Weight approx kg Part No. mm in Front No Size Gauge No Size Type Front Gauge Button bit 33 1 5/16” 2×7 5×7 35º 1 1 0.40 1431-33R25-27/57-45-41 35 1 3/8” 2×7 5×9 30º 1 1 0.50 1431-35R25-27/59-45-41 37 1 29/64” 2×7 5×9 30º 1 1 0.60 1431-37R25-27/59-45-41 38 1 1/2” 2×7 5×9 30º 1 1 0.60 1431-38R25-27/59-45-41 ... -
China Wholesale Hammer Drill For Rock Factory – Bench and long-hole drilling T38 (1 1/2 “) – LYNE
Bench and long-hole drilling T38 (1 1/2 ”) Bits Diameter Buttons,mm Angle Flushing hole Weight approx kg Part No. mm in Front No Size Gauge No Size Type Front Gauge Button bit 64 2 1/2” 3×11 6×12 30º 3 - 1.6 1432-64T38-311/612-45-41 64 2 1/2” 3×11 6×12 35º 3 - 1.6 1432-64T38-311/612-45-51 64 2 1/2” 5×9 8×10 35º 4 - 1.7 1432-64T38-59/810-45-51 70 2 3/4” 5×... -
China Wholesale Tbm Accessories Parts Factory – Shank adapters Furukawa – LYNE
Description: extension rod, other names are Extension drill steel, Extension drill rod, and Extension steel, M/F rod ( Speedrod ) , Produce Hexagonal and round cross sections, Hexagon rods are more rigid, heavier and transfer energy more efficiently, while increasing flushing. Round rods are generally lighter than hexagonal rods and are normally used in extension drilling applications. With the longer steel tending to be larger in diameter, conventional extension steel is characterized by a d... -
China Wholesale Tmt Taphole Drill Tools Manufacturers – Bench and long-hole drilling T38 (1 1/2 “) – LYNE
Bench and long-hole drilling T38 (1 1/2 ”) Bits Diameter Buttons,mm Angle Flushing hole Weight approx kg Part No. mm in Front No Size Gauge No Size Type Front Gauge Button bit 64 2 1/2” 3×11 6×12 30º 3 - 1.6 1432-64T38-311/612-45-41 64 2 1/2” 3×11 6×12 35º 3 - 1.6 1432-64T38-311/612-45-51 64 2 1/2” 5×9 8×10 35º 4 - 1.7 1432-64T38-59/810-45-51 70 2 3/4” 5×... -
China Wholesale Dth Drilling Tools Supplier – Bench and long-hole drilling T51 (2″) – LYNE
MF rod/Speed rod/Male-Female drill rods Threaded Connection: R22, R25, R32, R38, T38, T45, T51, T60 and so on. Diameter: OD32, OD38, Hex32, Hex35, And so on. Length: 800-6000mm. Package: Ply-wooden cases or wrapped with plastic knitting and then packed into bundles or as per your requests. Male / Male rod, Male/Female (M/F) Rod -Speed rod M/F drill steel is an alternative to couplings sleeves to include the female part of the threaded connection as an integral part of the drill steel. M/F dri... -
China Wholesale 18 Inch Disc Cutter Suppliers – Hard Rock Disc Cutters – LYNE
Disc Cutter is hard rock tool. It is to crush the rocks by the extruding force, shearing force and tensile force formed by cutter rolling. ( The rock strength, rock integrality, tunneling distance, sand content determine the selection, quantity, arrangement of Disc cutters on the Cutter Head). Disc Cutter is generally used in the loose strata which contain much gravels with the diameter bigger than 400mm, and the mixed ground with clay, sandy and up to 30MPa strength rocks. Shield cutters are... -
2 Rings Disc Cutter Factory – Foundation Auger Drilling Teeth B47k19h – LYNE
Replaceable Cutter Bit is one kind of Pre-cutting Bit. It can be installed in the Disc Cutter Holder to replace Disc Cutter in smaller-diameter gravel or intensely weathered rocks conditions. Replaceable Cutter Bit and Disc Cutter are spaced or alternated with each other in complex ground, so that Cutter Head can keep best composition during tunneling. Cutter Holder is the connection of cutter and Cutter Head, which facilitates the cutter replacement. Central Cutter Bit is used to cut the cen... -
China Wholesale Integral Drill Steels Factory – Bench and long-hole drilling T38 (1 1/2 “) – LYNE
Bench and long-hole drilling T38 (1 1/2 ”) Bits Diameter Buttons,mm Angle Flushing hole Weight approx kg Part No. mm in Front No Size Gauge No Size Type Front Gauge Button bit 64 2 1/2” 3×11 6×12 30º 3 - 1.6 1432-64T38-311/612-45-41 64 2 1/2” 3×11 6×12 35º 3 - 1.6 1432-64T38-311/612-45-51 64 2 1/2” 5×9 8×10 35º 4 - 1.7 1432-64T38-59/810-45-51 70 2 3/4” 5×... -
China Wholesale Tbm Tunnel Boring Machine Factory – R35 (1 3/8 “) bit thread – LYNE
R35 (1 3/8 ”) bit thread Bits Diameter Buttons,mm Angle Flushing hole Weight approx kg Part No. mm in Front No Size Gauge No Size Type Front Gauge Button bit 48 1 7/8” 2×9 5×11 35º 1 2 0.9 1431-48R32-29/511-45-41 51 2” 2×10 5×12 35º 1 2 1.0 1431-51R32-210/512-45-41 Button bit 48 1 7/8” 3×9 6×10 30º 3 1 0.9 1431-48R35-39/610-45-41 48 1 7/8” 3×9 6×10... -
China Wholesale Tapered Button Bits For Rock Drilling Tools Suppliers – Bench and long-hole drilling T60 (2 3/8″) – LYNE
Extension pole, extension rod, extension handle Threaded Connection: R32, R38, T38, T45, T51, and so on. Diameter: OD32, OD38, HEX32, HEX35, And so on. Length: 800-6000MM. Package: Wood case or wrapped with plastic knitting and then packed into bundles or as per your requests. Bench and long-hole drilling T60 (2 3/8″) Bits Diameter Buttons,mm Angle Flushing hole Weight approx kg Part No. mm in Front No Size Gauge No Size Type Front Gauge Button bit 92 3... -
Tapered Drilling Tools Suppliers – R35 (1 3/8 “) bit thread – LYNE
R35 (1 3/8 ”) bit thread Bits Diameter Buttons,mm Angle Flushing hole Weight approx kg Part No. mm in Front No Size Gauge No Size Type Front Gauge Button bit 48 1 7/8” 2×9 5×11 35º 1 2 0.9 1431-48R32-29/511-45-41 51 2” 2×10 5×12 35º 1 2 1.0 1431-51R32-210/512-45-41 Button bit 48 1 7/8” 3×9 6×10 30º 3 1 0.9 1431-48R35-39/610-45-41 48 1 7/8” 3×9 6×10... -
China Wholesale Mm Drill Rod Tbm Driving Disk Cutter Manufacturers – Coal mining teeth-U76 – LYNE
Protection Cutter Bits are the auxiliary cutters. They are classified into Protective Cutter Bit for Cutter Head, Protection Cutter Bit for Cutter Holder, Protection Cutter Bit for foam filling hole , Protective Cutter Bit for injection hole and Diversion Cutter, which base on their different roles. Copy Cutter Bit is installed on the gauge area of Cutter Head. While Shield Machine tunneling along curve or adjusting the direction, Copy Cutter Bit tries to minimize overbreak to leave the suffi...
Hello, come to consult our products !
