Bench and long-hole drilling T45 (1 3/4 “)

Rock drilling tools include: drill bit,drill rod, shank and coupling. The piston of drill rig directly impacts the shank, makes impact power reach the bit through rod by the form of stress wave, so as to work on the breakage of rock. The primary breaking way is impacting while the secondary is cutting; both are with high drilling efficiency. Usually the land surface of the earth is covered with loose, unconsolidated material such as soil, clay, silt, sand, gravel and boulders, which varies in depth from a few centimeters to hundreds of meters.Use concentric system can drill this complex formation very well.The systems are available through the whole product range the smallest being for 114 mm (4 1/2″) casing and largest size available at the moment is for 1220 mm (48″) casing.

Send email to us

Product Detail

Product Tags

Drifter rod
Drifter rod R32-Hex. 32-R28 10 feet.
Drifter rod R38-Hex. 32-R32 12 14 16 feet.
Drifter rod T38-Hex. 32-R32 12 14 feet.
Drifter rod R38-Hex. 35-R32 10 12 14 16 18 feet.
Drifter rod T38-Hex. 35-R32 12 14 16 18 20 feet.
M/F rods, T60-Round60-T60, length 3660mm/4265mm/6095mm

Bench and long-hole drilling T45 (1 3/4 ”)

Bits

Diameter

Buttons,mm

Angle

Flushing hole

Weight approx kg

Part No.

Front

No Size

Gauge

No Size

Type

Front

Gauge

Button bit

Bench and long-hole drilling T45 (1 3/4 ")

2 3/4”

5×10

8×11

30º

2.3

1432-70T45-510/811-45-41

3”

5×11

8×12

35º

2.5

1432-76T45-511/812-45-41

3”

5×11

8×12

35º

2.5

1432-76T45-511/812-45-41

3”

5×11

8×11

35º

2.5

1432-76T45-511/811-45-41

3 1/2”

5×13

8×13

35º

3.2

1432-89T45-513/813-45-41

3 1/2”

5×13

8×13

40º

3.2

1432-89T45-513/813-45-41

3 1/2”

5×12

8×12

35º

3.2

1432-89T45-512/812-45-41

102

4”

6×12

8×13

35º

4.4

1432-102T45-612/813-45-4

102

4”

6×12

8×13

35º

4.4

1432-102T45-612/813-45-51

102

4”

6×13

8×13

35º

4.4

1432-102T45-613/813-45-41

Button bit, Flat face
	76	3”	4×11	8×11	35º	2	-	2.7	1431-76T45-411/811-45-41
	76	3”	4×11	8×11	40º	2	-	2.7	1431-76T45-411/811-45-5
	89	3 1/2”	4×13	8×13	40º	2	-	3.5	1431-89T45-413/813-45-41
	76	3”	6×10	8×11	35º	2	-	2.7	1431-76T45-610/811-45-41
	76	3”	6×10	8×11	40º	2	-	2.7	1431-76T45-610/811-45-51
	89	3 1/2”	6×11	8×12	35º	2	-	3.5	1431-89T45-611/812-45-41
	89	3 1/2”	6×11	8×12	40º	2	-	3.5	1431-89T45-611/812-45-51
	102	4”	6×12	8×13	35º	2	-	4.5	1431-102T45-612/813-45-41
	102	4”	6×12	8×13	35º	2	-	4.5	1431-102T45-612/813-45-51
	89	3 1/2”	7×11	9×11	35º	3	-	3.5	1431-89T45-711/911-45-41
	89	3 1/2”	7×11	9×12	35º	3	-	3.5	1431-89T45-711/912-45-41
	102	4”	7×12	9×12	35º	3	-	4.5	1431-102T45-712/912-45-41
	102	4”	7×12	9×13	35º	3	-	4.5	1431-102T45-712/913-45-41

Button bit, Drop center
	76	3”	4×11	6×13	35º	3	1	2.5	1433-76T45-411/613-45-41
	76	3”	4×11	6×13	35º	3	1	2.5	1433-76T45-411/613-45-41
	89	3 1/2”	5×11	6×13	35º	3	1	3.2	1433-89T45-511/613-45-41
	89	3 1/2”	5×11	6×13	35º	3	1	3.2	1433-89T45-511/613-45-41
	76	3”	6×10	8×11	35º	4	1	2.7	1433-76T45-610/811-45-41
	76	3”	6×10	8×11	35º	4	1	2.7	1433-76T45-610/811-45-41
	89	3 1/2”	6×11	8×12	35º	4	1	3.5	1433-89T45-611/812-45-41
	89	3 1/2”	6×11	8×12	35º	4	1	3.5	1433-89T45-611/812-45-41
	102	4”	6×12	8×13	35º	4	1	4.5	1433-102T45-612/813-45-41
	102	4”	6×12	8×13	35º	4	1	4.5	1433-102T45-612/813-45-41
	115	4 1/2”	6×13	8×13	35º	4	1	6.2	1433-115T45-613/813-45-41

Button bit, Retrac
	70	2 3/4”	5×10	8×11	30º	4	-	2.7	1632-70T45-510/811-45-41
	76	3”	5×11	8×12	35º	4	-	3.2	1632-76T45-511/812-45-41
	76	3”	5×11	8×12	35º	4	-	3.2	1632-76T45-511/812-45-41
	76	3”	5×11	8×11	35º	4	-	3.2	1632-76T45-511/811-45-41
	89	3 1/2”	5×13	8×13	35º	4	-	4.8	1632-89T45-513/813-45-41
	89	3 1/2”	5×13	8×13	40º	4	-	4.8	1632-89T45-513/813-45-41
	89	3 1/2”	5×12	8×12	35º	4	-	4.8	1632-89T45-512/812-45-41
	102	4”	6×12	8×13	35º	4	-	6.8	1632-102T45-612/813-45-41
	102	4”	6×12	8×13	35º	4	-	6.8	1632-102T45-612/813-45-41
	102	4”	6×13	8×13	35º	4	-	6.8	1632-102T45-613/813-45-41

Button bit, Retrac, Flat face
	76	3”	4×11	8×11	35º	2	-	3.3	1531-76T45-411/811-45-41
	76	3”	4×11	8×11	40º	2	-	3.3	1531-76T45-411/811-45-5
	89	3 1/2”	4×13	8×13	40º	2	-	5.0	1531-89T45-413/813-45-41
	76	3”	6×10	8×11	35º	2	-	3.3	1531-76T45-610/811-45-41
	76	3”	6×10	8×11	40º	2	-	3.3	1531-76T45-610/811-45-51
	89	3 1/2”	6×11	8×12	35º	2	-	5.0	1531-89T45-611/812-45-41
	102	4”	6×12	8×13	35º	2	-	7.0	1531-102T45-612/813-45-51
	89	3 1/2”	7×11	9×11	35º	3	-	5.0	1531-89T45-711/911-45-41
	89	3 1/2”	7×11	9×12	35º	3	-	5.0	1531-89T45-711/912-45-41
	102	4”	7×12	9×12	35º	3	-	7.0	1531-102T45-712/912-45-41
	102	4”	7×12	9×13	35º	3	-	7.0	1531-102T45-712/913-45-41

Button bit, Retrac, Drop center
	76	3”	4×11	6×13	35º	3	1	3.3	1533-76T45-411/613-45-41
	76	3”	4×11	6×13	35º	3	1	3.3	1533-76T45-411/613-45-41
	89	3 1/2”	5×11	6×13	35º	3	1	5.0	1533-89T45-511/613-45-41
	76	3”	6×10	8×11	35º	4	1	3.3	1533-76T45-610/811-45-41
	76	3”	6×10	8×11	35º	4	1	3.3	1533-76T45-610/811-45-41
	89	3 1/2”	6×11	8×12	35º	4	1	5.0	1533-89T45-611/812-45-41
	102	4”	6×12	8×13	35º	4	1	7.0	1533-102T45-612/813-45-41

Guide bit
	76	3”	6×10	8×11	35º	4	-	2.5	1632-76T45-610/811-45-41
	89	3 1/2”	6×11	8×12	35º	4	-	3.2	1632-89T45-611/812-45-41

Reaming bit, T45
	127	5”	6×14	8×14	35º	4	-	6.9	1441-127T45-614/814-45-41
	152	6”	6×14	8×14	35º	4	-	9.2	1441-152T45-614/814-45-41

Rods	Length		Diameter		Weight approx kg	Part No.
Rods	mm	ft/in	mm	inch	Weight approx kg	Part No.
Extension rod, T45－Round46－T45
	3050	10＇	45	1 3/4”	34.2	23R46-T45-3050-23
	3660	12＇	45	1 3/4”	41.0	23R46-T45-3660-23
	4270	14＇	45	1 3/4”	47.8	23R46-T45-4270-23

MF－rod, T45－Round46－T45
	1525	5＇	45	1 3/4”	18.7	24R46-T45/65-1525-23
	1830	6＇	45	1 3/4”	22.1	24R46-T45/65-1830-23
	3050	10＇	45	1 3/4”	35.8	24R46-T45/65-3050-23
	3660	12＇	45	1 3/4”	42.6	24R46-T45/65-3660-23
	4270	14＇	45	1 3/4”	49.4	24R46-T45/65-4270-23
	6100	20＇	45	1 3/4”	70.0	24R46-T45/65-6100-23

Guide tube
	1830	6＇	64	2 1/2”	26.0	24G64-T45/64-1830-23
	3660	12＇	64	2 1/2”	49.9	24G64-T45/64-3660-23
	3660	12＇	76	3”	79.9	24G76-T45/76-3660-23

Coupling sleeve
	T45	210	8 1/8”	63	2 15/32”	2.7	31-T45-63-210-23
	T45	210	8 1/8”	66	2 5/8”	3.2	31-T45-66-210-23

Description: extension rod, other names are Extension drill steel, Extension drill rod, and Extension steel, M/F rod ( Speedrod ) , Produce Hexagonal and round cross sections, Hexagon rods are more rigid, heavier and transfer energy more efficiently, while increasing flushing. Round rods are generally lighter than hexagonal rods and are normally used in extension drilling applications. With the longer steel tending to be larger in diameter, conventional extension steel is characterized by a duplicate thread on each end of the
steel.

Previous: Bench and long-hole drilling T38 (1 1/2 “)

Next: Bench and long-hole drilling T51 (2″)

Bore Hole Drill Bit